Having trouble getting your heated shirt to turn on? Don’t worry—we're here to help! Follow the step-by-step instructions below to make sure everything is set up properly.

 Step 1: Fully Charge the Battery

Before using your shirt, charge the battery for at least 6 hours to ensure a full charge. This is essential for the shirt to function correctly.

 Step 2: Connect the Battery

• Plug the fully charged battery into the power cable located inside the shirt.

 Step 3: Power On the Battery

• Press the power button on the battery.

• The battery lights will turn on briefly, then turn off—this means the battery is active and ready.

 Step 4: Turn On the Shirt

• Locate the power button on the shirt, found on the left wrist area of the sleeve.

• Press and hold this button for 3 seconds to power on the shirt.

 Step 5: Adjust the Heat Setting

• Once powered on, tap the shirt’s power button to cycle through heat levels:

  •  Green – Low

  •  Yellow – Medium

  •  Red – High

 Step 6: Turn Off the Shirt

• To turn the shirt off, press and hold the power button for 3 seconds.

 Still Having Issues?

If your shirt doesn’t power on or isn’t heating properly:

• Double-check that the battery is fully charged and securely connected.

• Confirm that you’re pressing and holding the shirt’s power button for a full 3 seconds.

• Let us know which step you're having trouble with, and we’ll be happy to assist you further.

If you have any other questions, don’t hesitate to reach out—we’re here to help you stay warm and comfortable!