Welcome to your new heated jacket! To help you get the most out of it, follow the steps below to charge the battery, power on the jacket, and adjust the heat settings.

If you're experiencing any issues, we've included some troubleshooting tips at the end.


 Step 1: Charge the Battery

Before first use, charge your battery for at least 6 hours to ensure a full charge. This is essential for optimal performance.


 Step 2: Connect the Battery

  1. Locate the power cable inside the jacket.

  2. Plug the fully charged battery into this cable.


 Step 3: Power On the Battery

  1. Press the power button on the battery.

  2. The battery lights will briefly illuminate, then turn off—this means it’s on and ready.


 Step 4: Turn On the Jacket

  1. Find the jacket’s power button (usually on the left chest area, either inside or outside the jacket).

  2. Press and hold the power button for 3 seconds until it lights up.


 Step 5: Adjust the Heat Level

Tap the jacket's power button to cycle through the three temperature settings:

  •  Blue – Low

  •  White – Medium

  •  Red – High


 Step 6: Turn Off the Jacket

To power off the jacket, press and hold the power button for 3 seconds.


 Need Help?

If your jacket doesn't power on or you're experiencing issues:

  • Double-check that the battery is fully charged and properly connected.

  • Let us know which step you're having trouble with—we're happy to assist!


Still have questions? Our support team is here to help. Just reach out and we’ll get you warmed up in no time!